Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

December 09 2015

Play fullscreen
Learning How to Make Guitar-Type Instruments - Is it Easy to Do?

Understand how to make guitars and guitar-type instruments, you only need to grasp a few basic facts. Investigating things simply in the beginning, how to make a guitar can all be logically understood by dissecting the instrument into three major parts; you have the body, which can be hollow, or solid when it comes to an electric guitar; there is the neck, which both sports ths strings taught in addition to provides a place for fingers to press the strings against (at different places, effectively shortening the duration of the vibrations thereof, to varying degrees), for creating different notes; next you have the strings themselves. Let us take a closer look at the first 2... - Jadakiss Type Beat

Before we get into the math associated with fret placement, if you're looking to know how to make guitar necks such as those we see on guitars in instrument shops, particularly with those electric types who use steel strings, you will invariably need to route a channel (usually under the fret board, before attaching it) centrally on the length of it for the truss rod to be kept in place. A truss rod is used to correct any natural bowing which could occur in the wood from the neck, or which could also be due to the stresses of stretching steel strings on there, by adjusting the strain thereof.

Understanding how to make a throat for acoustic types the ones using nylon or any other material for strings, we find that this may not be necessary. Creating a slight arc to the fret board over the cross section of the neck might be desired, depending upon the player's specific needs - using this aspect of how to make guitar necks, you'll find that these can be of different radii, including with the Gibson type guitar fret boards, that may be of a 12" radius arc.

Steps to make guitar fret placements down the length of the neck become known has a wee bit of math - somewhat trick known as the "18 rule". The 18 rule is often a means of finding precisely where to place each fret around the fret board, and it is a must-have bit of information, if you really want to know how to create a guitar. It goes like this; you measure the distance in the "effective length" of the string... this means, the part of the string that lies freely involving the "nut" at the head stock end of the neck (also called the "zero fret"), and also the "bridge" at the body end with the strings.

You then take this measurement and divide by 18 - or considerably more precisely, 17.8167942... take the answer to that math problem, along with the precise distance from your nut to place the very first fret. Now measure from that newly found first fret placement as well as the bridge, divide that by 17.8167942, and you have precisely where you should put the next fret, and the like. The number 17.8167942 is fairly close to 18, thus the specific rule.

There are other factors to learn how to make guitar type instruments, but none that are quite as mathematically involved as finding fret placements much. Now that you know the 18 rule, you have got the hardest mathematical part in your memory. So as you can see, figuring out how to make a guitar and putting one together needn't be very difficult. The rest is all a matter of how well you work with your hands and what tools you might have at your disposal. With guitar strings, fret wire, machine heads and wood clamps and such, readily available and easily enough bought, it's all regulated easy enough to put together when you are aware how. - Jadakiss Type Beat

Don't be the product, buy the product!